FAQ Search Memberlist Usergroups Profile Log in to check your private messages
 Forum Index      Log in  Register
PKD1 - need parts!

 
Post new topic   Reply to topic     Forum Index -> Blade Runner Blaster Information and Discussion
View previous topic :: View next topic  
Author Message
dreamtraveler



Joined: 18 Jan 2016
Posts: 3

PostPosted: Fri Aug 05, 2016 3:54 pm    Post subject: PKD1 - need parts! Reply with quote

I finally took the plunge and bought a PKD1 kit off eBay that was partially assembled. I got what I considered to be a great deal, but unfortunately, the kit is missing the following parts:

Slide switch button
back trigger
both trigger springs
trigger screws
LED kit
handle screws
light box screws?

I figured I could 3D print some of the missing parts, but the directions don't give much of any indication of sizing. I also don't know what the screw or spring sizes are. So basically, I'm hoping some with a PKD blaster can maybe point me in the right direction for either replacements or maybe good measurements so I can try to recreate the parts on my 3D printer. Any help would be appreciated!
Back to top
View user's profile Send private message
Author Message
Mr Webber
Community Member


Joined: 13 Apr 2008
Posts: 1824
Location: Terra Australis

PostPosted: Sat Aug 06, 2016 11:09 pm    Post subject: Reply with quote

With parts missing and the unlikely chances of getting existing replacement parts so high, I`d opt for a refund and regroup.
_________________
Formerly offworld66
Back to top
View user's profile Send private message
Author Message
joberg
Community Member


Joined: 06 Oct 2008
Posts: 9447

PostPosted: Sun Aug 07, 2016 7:33 am    Post subject: Reply with quote

You may want to contact Rick Ross (Doppelganger on this board).
He's the maker of this kit and could offer you some tips/counsel about replacement and scale.
Back to top
View user's profile Send private message
Author Message
Kokanee
Community Member


Joined: 14 Jul 2016
Posts: 32

PostPosted: Sun Aug 07, 2016 9:45 pm    Post subject: Reply with quote

Paypal dispute and get your money back.
Back to top
View user's profile Send private message
Author Message
hirohawa
Community Member


Joined: 18 May 2006
Posts: 1067

PostPosted: Sun Aug 07, 2016 10:23 pm    Post subject: Reply with quote

I am pretty sure a Coyle trigger and Slide switch button will work on this build. Everything else can be bought at a hardware store and Radio shack for less than $15 bucks
Back to top
View user's profile Send private message AIM Address
Author Message
dreamtraveler



Joined: 18 Jan 2016
Posts: 3

PostPosted: Mon Aug 08, 2016 12:36 pm    Post subject: Reply with quote

I wound up getting a hold of Rick. He had the 3D files for the PKD1 and was able to send me the the trigger and switch files. I have a 3D printer, so this is a perfect solution for me. I've already sourced the missing screws and all the electronics for the LED kit. As soon as I track down some screws, I'll have everything I need!
On a side note, Rick is a really nice guy and I can't thank him enough for helping me out.
Back to top
View user's profile Send private message
Author Message
Mr Webber
Community Member


Joined: 13 Apr 2008
Posts: 1824
Location: Terra Australis

PostPosted: Mon Aug 08, 2016 7:13 pm    Post subject: Reply with quote

Great result.
_________________
Formerly offworld66
Back to top
View user's profile Send private message
Author Message
hirohawa
Community Member


Joined: 18 May 2006
Posts: 1067

PostPosted: Mon Aug 08, 2016 10:56 pm    Post subject: Reply with quote

dreamtraveler wrote:
I wound up getting a hold of Rick. He had the 3D files for the PKD1 and was able to send me the the trigger and switch files. I have a 3D printer, so this is a perfect solution for me. I've already sourced the missing screws and all the electronics for the LED kit. As soon as I track down some screws, I'll have everything I need!
On a side note, Rick is a really nice guy and I can't thank him enough for helping me out.


Rick is not only super talented nut a really nice guy too! Glad it worked out.
Back to top
View user's profile Send private message AIM Address
Author Message
joberg
Community Member


Joined: 06 Oct 2008
Posts: 9447

PostPosted: Mon Aug 15, 2016 7:46 pm    Post subject: Reply with quote

Well, everything ends great and thanks to Rick Cool
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Blade Runner Blaster Information and Discussion All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001, 2002 phpBB Group
BBTech Template by © 2003-04 MDesign

Problems Registering Contact: help@propsummit.com